Haier washer error code · E4
Not filling
This is a washing-machine fault guide. The code above comes from the washer display; it is not the model number. Model-gated checks for E4, slow fill, or no water.
Step 1 · Verify the appliance
Enter the complete model number
A brand and error code are not enough. Unsupported or mismatched models stop here.
Step 3 · Cost decision
Repair, claim warranty, or replace?
This transparent heuristic starts only after safe checks and a real repair estimate. It never identifies a failed part.
We may later earn a commission from clearly labeled links. For now, no part is recommended from an error code alone. Match the full model number and confirm the failed component first.
Affiliate placement reserved; editorial results do not change based on commission.Primary sources
Check the evidence
- Combination Washer/Dryer — Error Codes
Haier maps Err2 to a drain condition, E4 to failure to reach the selected water level, and Unb to an unbalanced load on supported combination units.
- Portable Washer Error Codes
Haier maps E1/E6 to drain issues, E4 to filling, and E3 or dd to spin or load-balance checks on supported portable washers.
- Recalls & Product Safety Warnings
CPSC recall remedies can require immediate stop-use and supersede general troubleshooting.
- Warranties
The FTC advises consumers to read warranty coverage and use the required claim process before paying for repair.