Whirlpool washer error code · F8 E1 / Lo FL

Not filling

This is a washing-machine fault guide. The code above comes from the washer display; it is not the model number. Model-gated checks for F8 E1 / Lo FL, slow fill, or no water.

Stop immediately for smoke, burning odor, sparking, violent movement, or water near electrical parts. Do not touch a wet plug.

Step 1 · Verify the appliance

Enter the complete model number

A brand and error code are not enough. Unsupported or mismatched models stop here.

Step 3 · Cost decision

Repair, claim warranty, or replace?

This transparent heuristic starts only after safe checks and a real repair estimate. It never identifies a failed part.

Published rule: warranty coverage wins first. Otherwise the tool compares repair cost with delivered replacement cost, then uses age and repeat failure only as tie-breakers. It does not include energy savings, financing, sentimental value, or local disposal incentives.

Parts note

We may later earn a commission from clearly labeled links. For now, no part is recommended from an error code alone. Match the full model number and confirm the failed component first.

Affiliate placement reserved; editorial results do not change based on commission.

Primary sources

Check the evidence

  • Error Codes in Top Load HE Washers
    Whirlpool Product Help · accessed 2026-09-16

    Whirlpool maps DRN, F8 E1/Lo FL, and Ofb to drain, fill, and out-of-balance conditions and supplies user-level checks.

  • Recalls & Product Safety Warnings
    U.S. Consumer Product Safety Commission · accessed 2026-09-16

    CPSC recall remedies can require immediate stop-use and supersede general troubleshooting.

  • Warranties
    Federal Trade Commission · accessed 2026-09-16

    The FTC advises consumers to read warranty coverage and use the required claim process before paying for repair.

Manufacturer pages cover broad product families. Your owner’s manual and recall notice control when they differ.