Whirlpool washer error code · F9 E1 / DRN
Not draining
This is a washing-machine fault guide. The code above comes from the washer display; it is not the model number. Model-gated checks for F9 E1 / DRN or water left in the drum.
Step 1 · Verify the appliance
Enter the complete model number
A brand and error code are not enough. Unsupported or mismatched models stop here.
Step 3 · Cost decision
Repair, claim warranty, or replace?
This transparent heuristic starts only after safe checks and a real repair estimate. It never identifies a failed part.
We may later earn a commission from clearly labeled links. For now, no part is recommended from an error code alone. Match the full model number and confirm the failed component first.
Affiliate placement reserved; editorial results do not change based on commission.Primary sources
Check the evidence
- F9 E1 — Front Load Washer
Whirlpool identifies F9 E1 as a long-drain condition and directs users to check the hose, accessible pump filter, and door-seal drainage.
- Error Codes in Front Load Washers
Whirlpool notes that codes and procedures vary by model and the owner manual controls.
- Error Codes in Top Load HE Washers
Whirlpool maps DRN, F8 E1/Lo FL, and Ofb to drain, fill, and out-of-balance conditions and supplies user-level checks.
- Recalls & Product Safety Warnings
CPSC recall remedies can require immediate stop-use and supersede general troubleshooting.
- Warranties
The FTC advises consumers to read warranty coverage and use the required claim process before paying for repair.